Welcome, Guest Login

Support

Swift Console

The Swift Console is a Graphic User Interface (GUI) program providing visual representation of what's happening inside the Swift Navigation Piksi Multi and Duro GNSS receiver. Console displays information and allows to adjust the settings on the hardware.

The Swift Console runs on Windows, Linux, and macOS platforms.

For detailed instructions on installing and operating the Swift Console on your computer, see the Installation Instructions and User's Guide.
To communicate with Piksi Multi and Duro over an RS-232 serial interface with the RS232-USB adapter included in the evaluation kit a special USB driver may need to be installed on your PC. Read this driver installation article for details.

To communicate with Piksi Multi over the USB interface directly a special driver may need to be installed on your PC. Read this driver installation article for details.

Known Issues
2018-03-13 Swift Console v1.4.3 on MacOS: sometimes the drop-down widgets used in the settings tab and for the log level filter widget have a glitch whereby multiple entries can be selected at the same time and/or the widget becomes unstable.  In this case, please close and re-open the console.  This issues happens less frequently when the amount of data being received by the console is reduced; consider lowering the solution rate or removing some SBP messages from the "enabled_sbp_messages" setting for the interface.
2017-12-21 Swift Console v1.3.7 on Linux: sometimes the file/directory selection popup dialog interrupts serial communication (USB and RS232). In such case it is necessary to close and re-open the console.  This issue should be fixed on v1.4.3 of the linux console.
 
Last Updated: Aug 20, 2018 04:18PM PDT
fca1b46c3a1b1cf102986602d2d2d39a@swiftnav.desk-mail.com
https://cdn.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete